2022 and newer Toyota Tundra no-drill front license plate bracket

For those with a tundra and don't want to drill the bumper this will allow you to mount without doing so. Comes with stainless steel screws and locknuts. I can also print in colors if you so desire, just let me know what you would like. Otherwise this will be printed in black petg.

Instructions:

Insert 10-24 nylon lock nuts into the premade sockets. They should press in fairly snugly but add a drop of glue to secure them. Before installing, run the screws in and out once to clean out any wayward glue. Slide the backer piece into a slit in the lower grille and work it around so that it faces forward. Use the wire bundles to help keep it from falling as you work it into position. Take the two 10-24 flathead screws and fasten the main bracket to the backer. Then take two pan head 10-24 x Screws and fasten the plate (with or without a frame) to the main bracket placing a washer between the screw head and plate. I've included 4 screws, nuts and washers. If you want shorter screws for the plate, feel free to get shorter stainless screws from any hardware store.

Before you start the installation, you can glue on a piece of foam, rubber, cloth or whatever to the back of the main mount where it will contact the bumper to protect it. My original bracket used a piece of thin foam packing material as in the photo. My final bracket used a piece of adhesive backed silicone rubber I got from Amazon: https://www.amazon.com/dp/B07GL9MHW7?psc=1&ref=ppx_yo2ov_dt_b_product_details